D100 2-CHANNEL DIGITAL PREAMPLIFIER

SKU: D100 Category:

Description

The D100 is a remote controlled digital stereo preamplifier with five digital inputs (2 Coaxial, 2 Optical and 1 USB), and both variable and fixed volume audio output. It is a simple solution to add digital music to an existing McIntosh system. Or simply add an amplifier, a pair of speakers and a digital source for a complete digital based stereo system. It’s also flexible enough to be used a headphone amplifier; just connect your digital sources and a pair of headphones for a personal listening experience.

“This is a product that is superbly well implemented and a genuine pleasure to listen to and live with. The performance across a wide variety of music is utterly compelling.” – AVforums.com

“Stunning… As a stand-alone DAC, or a pre-amp, or an all-in-one DAC/headphone amp, this state-of-the-art component easily serves as an indispensable accompaniment to any system.” – Audio360.org

It shares the classic façade, knobs and handcrafted black-glass front panels as all other McIntosh components in a small form factor of just under 4″ in height. Its powerful built in headphone amplifier will elevate the sound of your favorite headphones so that you may enjoy the ultimate personal listening experience. (Headphones not included.)

“Regardless of source the D100 has an appealing balance of agility and refinement.” – WhatHiFi.com

“The D100 is a beautiful sounding piece, with fantastic resolution delivered edge-free, smooth.” – Head-Fi.org

“The D100 plays all your music with great joy” – The-Ear.net

The D100 utilizes an 8 channel, 32-bit, 192kHz D/A converter with wide dynamic range and extremely low distortion. Eight channel D/A converter is used in stereo Quad Balanced mode. Music at all levels is reproduced with extreme precision and elegance. A 1/8” mini jack is provided for control data from the data output jack of a McIntosh preamp or A/V Control Center.

Additional information

Brand

ELECTRONIC SPECIFICATIONS
TOTAL HARMONIC DISTORTION
0.0015%
FREQUENCY RESPONSE
+/-0.5dB from 4Hz to 20,000Hz
+0.5/-3dB from 4Hz to 68,000Hz (Source dependent)
MAXIMUM VOLTS OUT (BALANCED / UNBALANCED)
16/8 V RMS
INPUT IMPEDANCE (BALANCED / UNBALANCED)
N/A
PHONO VOLTAGE GAIN
N/A
HIGH LEVEL VOLTAGE GAIN
N/A
SIGNAL TO NOISE RATIO
110dB
DUAL MONO POWER SUPPLY
No
DUAL MONO, FULLY BALANCED
Digital, Fully Balanced
CONNECTIVITY
BALANCED INPUT
0
UNBALANCED INPUT
0
PHONO INPUT MOVING COIL
0
PHONO INPUT MOVING MAGNET
0
DIGITAL COAXIAL INPUT
2
DIGITAL OPTICAL INPUT
2
DIGITAL MCT (DIN) INPUT
0
DIGITAL USB INPUT
1 (2.0, 32/192 Asynchronous)
DIGITAL AES/EBU INPUT
0
BALANCED FIXED OUTPUT
1 Stereo
BALANCED VARIABLE OUTPUT
1 Stereo
UNBALANCED FIXED OUTPUT
1 Stereo
UNBALANCED VARIABLE OUTPUT
1 Stereo
HEADPHONE OUTPUT
1/4″ High Drive
RECORD PROCESSOR LOOP
No
INPUT LEVEL MATCH
No
HOME THEATER PASS THROUGH
No
CONTROL
TONE CONTROLS
No
TONE BYPASS AND INPUT ASSIGN
No
RS232 CONTROL INPUT
No
POWER CONTROL OUTPUT
1
REAR PANEL DATA PORT
1
REAR PANEL IR SENSOR INPUT
Yes
GENERAL SPECIFICATIONS
MULTI-CHASSIS OR SINGLE
Single
OUTPUT METERS
No
VACUUM TUBE OR SOLID STATE
Solid State
POWER CONSUMPTION (ON)
20 watts
WEIGHTS & DIMENSIONS
DIMENSIONS (W X H X D)
17.5″ (44.45cm) x 3-7/8″ (9.8cm) x 16″ (40.64cm)
WEIGHT
13.5 lbs (6.1kg)
SHIPPING WEIGHT
28 lbs (12.7kg)

Reviews

There are no reviews yet.

Be the first to review “D100 2-CHANNEL DIGITAL PREAMPLIFIER”

Your email address will not be published. Required fields are marked *